Rotary switch changeover THPG white glass Bakelite

Delivery time if not in stock: approx. 1-2 weeks

product

Rotary switch changeover THPG white glass Bakelite

Bakelite rotary switch for full-surface white glass covers. Shown here as a two-way switch. A two-way switch can be used either individually as an on/off switch or in combination with a second two-way switch to control a light fixture. If switching from more than two locations is required, a cross switch is needed for each additional location.

Installation note: The wallpaper must be no more than 0.5 mm thick to comply with all VDE regulations and standards. Therefore, the cavity wall boxes must be installed precisely so that the 1 mm thick plastic cover is flush with the wall. The installation of our switches with glass covers requires a different procedure than usual: The electrician installs the internal components and the plexiglass ring. Wallpaper is then applied over the fully connected switch, and finally, the covers are attached. If you intend to install several individual covers side by side, you must take this into account when positioning the boxes; 20 mm spacers are required in this case. When installing system covers, ensure a precise center-to-center distance of 71 mm. We generally recommend the Kaiser box range, which also offers the appropriate spacers.